How To Install Outdoor Step Lights

Your deck tin can be the setting for many relaxing evenings. The primal is to add lighting that casts a nice glow over the seating areas, highlight features and illuminate steps and walkways. Installing low voltage LED step lights is the most cost-efficient way to illuminate the steps exterior of your dwelling.

If the night is calling you, pull up a lounge chair and enjoy it from your back yard. Your deck can be the setting for many relaxing evenings. The key is to add lighting that casts a nice glow over seating areas, highlights features and illuminates steps and walkways. Installing low voltage LED step lights is the almost cost-efficient way to illuminate the steps outside of your home. Low voltage exterior lighting ensures safety by providing just enough lighting at night to help you see the steps. Low-voltage systems do this well and they're safe and easy to work with. Dissimilar with standard household voltage, the transformer that powers them simply plugs into a receptacle. For this particular how-to article, nosotros will be enumerating the steps in installing low voltage LED stair riser lights which you can purchase preassembled in a number of designs or you can build your ain.

Step 1: Describe up a lighting plan

Before you install whatever fixtures in the property, mark their approximate positions in the landscape using pocket-size flags or pencils. Indicate the positions on your sketch and mark what fixture types will go at each location. As you walk through the holding, make crude measurements to signal the distances between fixtures and the transformer, and between the fixtures themselves.

Step 2: Determine wire runs

Now, the chore is to programme how to provide ability to the fixtures. Starting with the i that is farthest from the transformer, run the low voltage wire from light to light. Leave a 6-inch loop of wire at each step calorie-free location.

Step 3: Lucifer the polarity of the wires

In that location will be one smoothen black wire and another wire may exist ribbed with white lettering. Agree the wire ends together then twist waterproof wire basics to create a tight connection. With electrical tape, wrap the connexion.

Step 4: Mount the transformer

For this step, make sure y'all read the instructions for your transformer. Turn off the on/off switch. Attach the transformer to your desired location with the use of mounting brackets. Run the wires into place and then connect. Ensure that the photo eye sensor is exposed to sunlight.

Step five: Test the light

Plug the transformer into the outlet. Turn it on and exam the lighting and gear up the timer as necessary. Unplug the transformer. Advisedly attach the top cap over to hide the low voltage wire, making sure that you lot practise not to spiral into the wire.

Read our consummate guide on outdoor lighting tips tricks and considerations.